Wavian Water Can OD Green - 5.8 Gallon (22 Liter)
Wavian USA brings you these brand-new, heavy-duty plastic water cans. BPA-free, food-grade, and UV-stabilized for extended outdoor use, they're made to last in Australia for the Military. An opaque resin inhibits bacterial growth and the textured non-slip surface improves grip. A breather was added for fast, "No-Glug" pouring. They're ideal for the storage of drinking water and hold 5 gallons (22 liters). Did you know that our 20L fuel can holders are also a perfect fit for these water cans?
Recommended companion product: Wavian Water Can Opener
Internal Reference:
3214
The jerry can shape, molded for drinking water.
The Wavian water can holds 22 liters (5.8 US gallons) in a food-grade, BPA-free plastic body made in Australia. The resin is UV stabilized for extended outdoor use and opaque to inhibit bacterial growth. A textured surface gives you a better grip when the can is wet, and it fits the Wavian 20L fuel can holders, so water and fuel can ride in the same mounts.
Same body, same capacity, same hardware in every color. Shop Blue, Black or OD Green.
Pours from a tap, standing up.
Set the can on a tailgate, a shelf or a camp table and open the tap. No lifting, no tipping, no funnel. A breather vent on top lets air in as water flows out, so the stream stays steady.
Upright pouring.
The tap sits low on the can and pours with the can in its normal upright position. Fill a bottle, a pot or a kettle without picking up 22 liters of water.
Detachable for transport.
The tap threads into a 20 mm (3/4 inch) BSP port and swaps with the plug for a leak-proof seal on the move. Hand tighten only. Over-tightening can damage the threads.
Marked for water, molded in.
WATER, Wavian and the Made in Australia mark are molded into the body, not printed on, so the markings will not wear off the way a label can.
The plastic is food grade and BPA free. UV stabilizing helps it hold up in the sun, and the opaque resin keeps light out, which inhibits bacterial growth in stored water.
Tethered screw cap.
The wide fill opening closes with a screw cap on a tether, so the cap stays with the can while you fill it.
Built-in breather.
The vent lets air in as water flows out, for no-glug pouring and less spillage.
| Capacity | 22 liters (5.8 US gallons) |
| Dimensions | 13.75 x 6.875 x 18.25 in (L x W x H) |
| Empty weight | 3.2 lb (shipping weight 5 lb) |
| Material | Food-grade, BPA-free plastic, UV stabilized, opaque |
| Surface | Textured, non-slip |
| Pour | Detachable tap, 20 mm (3/4 in) BSP thread, interchangeable with plug |
| Venting | Built-in breather |
| Colors | Blue, Black, OD Green |
| Holder compatibility | Wavian 20L fuel can holders |
| Country of origin | Australia |
Recommended with the Wavian Water Can Opener. This can is for drinking water only. For fuel, use the Wavian 20L NATO jerry can.
The jerry can shape, molded for drinking water.
The Wavian water can holds 22 liters (5.8 US gallons) in a food-grade, BPA-free plastic body made in Australia. The resin is UV stabilized for extended outdoor use and opaque to inhibit bacterial growth. A textured surface gives you a better grip when the can is wet, and it fits the Wavian 20L fuel can holders, so water and fuel can ride in the same mounts.
Same body, same capacity, same hardware in every color. Shop Blue, Black or OD Green.
Pours from a tap, standing up.
Set the can on a tailgate, a shelf or a camp table and open the tap. No lifting, no tipping, no funnel. A breather vent on top lets air in as water flows out, so the stream stays steady.
Upright pouring.
The tap sits low on the can and pours with the can in its normal upright position. Fill a bottle, a pot or a kettle without picking up 22 liters of water.
Detachable for transport.
The tap threads into a 20 mm (3/4 inch) BSP port and swaps with the plug for a leak-proof seal on the move. Hand tighten only. Over-tightening can damage the threads.
Marked for water, molded in.
WATER, Wavian and the Made in Australia mark are molded into the body, not printed on, so the markings will not wear off the way a label can.
The plastic is food grade and BPA free. UV stabilizing helps it hold up in the sun, and the opaque resin keeps light out, which inhibits bacterial growth in stored water.
Tethered screw cap.
The wide fill opening closes with a screw cap on a tether, so the cap stays with the can while you fill it.
Built-in breather.
The vent lets air in as water flows out, for no-glug pouring and less spillage.
| Capacity | 22 liters (5.8 US gallons) |
| Dimensions | 13.75 x 6.875 x 18.25 in (L x W x H) |
| Empty weight | 3.2 lb (shipping weight 5 lb) |
| Material | Food-grade, BPA-free plastic, UV stabilized, opaque |
| Surface | Textured, non-slip |
| Pour | Detachable tap, 20 mm (3/4 in) BSP thread, interchangeable with plug |
| Venting | Built-in breather |
| Colors | Blue, Black, OD Green |
| Holder compatibility | Wavian 20L fuel can holders |
| Country of origin | Australia |
Recommended with the Wavian Water Can Opener. This can is for drinking water only. For fuel, use the Wavian 20L NATO jerry can.
Specifications
| Color | Olive Drab |